The power of PEMF

Backed by science

Used by millions

PEMF is safe, non invasive and drug free alternative with proven results for relaxation, sleep, meditation, pain relief and well-being.

CELLER8 controller

What is PEMF?

PEMF stands for Pulsed Electro Magnetic Fields. The CELLER8 controller and mats have been designed to emit PEMF’s at beneficial and therapeutic frequencies, similar to those that the earth produces naturally. These fields can penetrate deep into your body’s tissues and interact with individual cells. Stimulating cellular activity, promoting regeneration, repair, pain relief and rehabilitation. The rate these fields are being emitted influence our physiological functioning, connecting our mental and physical processes without affecting our neuronal activity. This results in relaxation, focus, and improved cognitive function.

Magnetic field around CELLER8

What is PEMF used for?

A lot of the PEMF therapy devices on the market are used for many reasons, the most common being pain relief, recovery from chronic illness, accelerated performance in sport or enhanced physical ability and as a tool to help you get a good night’s sleep. PEMFs are not related to conditions specifically as it is creating an environment within the body to heal itself. It does however depend how a PEMF device is registered as to what claims each PEMF device can make. If a PEMF device is not medically registered, it cannot make medical claims or relate to any medical conditions even if the PEMF sessions are similar. But really with Pulsed Electro Magnetic Fields, the possibilities are endless! 

BODY

PEMF can penetrate deep into the body's tissues and cells and when it does it stimulates cellular activity promoting regeneration, repair, pain relief and rehabilitation.

MIND

We can alter our brainwave states by choosing different frequencies. This results in relaxation, focus, and improved cognitive function.

The science

There are thousands of study's when it comes to PEMF. Here is a list of studies from the last two decades about the effects of PEMF:  https://www.ncbi.nlm.nih.gov/pmc/articles/PMC8342182/


One way the positive effects of PEMFs on the blood and cells within the body can be seen through a microscope instantly and these effects tend to last for hours even days after a session. 

Blood before PEMF
Before PEMF
Blood after PEMF
After PEMF

What is PEMF Intensity?

Intensity is the strength of the magnetic field produced from the PEMF therapy device; it is usually measured in Gauss. The CELLER8® PEMF device has an adjustable intensity of 1 – 100 Gauss to suit the user. This intensity range was not plucked out of the air and there is evidence that shows 10-100 gauss to be more effective in establishing a cellular response. Click here to read the study.


When it comes to intensity we believe more is better as the magnetic field range is much larger, however some people who are new to PEMFs prefer the ‘low and slow’ approach and the CELLER8® gives you the ability to lower the intensity when desired. 

What is PEMF frequency?

Frequency is the pulse rate of a PEMF device. For example, how frequently a device pulses per second. The CELLER8® has a customisable frequency setting of 1 – 100 Hz. 


We have taken the confusion out of this question by presenting the program frequencies to optimise your session but still allowing those of you that want to choose specific frequencies you can do this by using the custom program setting. CELLER8 can emit BETA, ALPHA, DELTA, and THETA waves.

Who is PEMF used by?

PEMF is used by millions worldwide but here are some names you may of heard of...

PEMF FAQ

Who shouldn’t use PEMFs? 

Anyone with pace makers are not able to use Pulsed Electromagnetic Fields. You must also check the manual before using CELLER8® for up-to-date contraindications and warnings. For any specific concerns get in touch with us and we are always happy to help.

How does P(EMF's) differ to potentially harmful EMF's? 

The easiest way to describe the difference between therapeutic P(EMF’s) and potentially harmful EMF’s is to look at the range they use. A good PEMF device will have a range between 1Hz – 100Hz, which are defined as within the therapeutic range. Some PEMF devices go up to 1,000Hz, which is still OK and has shown to be effective for Depression according to the FDA, but I wouldn’t go higher that those frequencies when using PEMF’s. If you compare this to the phones, we use against our heads now on 5GHz which is actually 5,000,000,000Hz (5 billion Hz). So, this gives you some idea of how far apart these frequencies are.


At 5GHz, studies have shown how these frequencies are absorbed by the body and they vibrate and heat our cells. Effectively they are cooking us from the inside. If you use your phone against your head for 20-30 minutes, scans will show how the brain is heated during that time by those frequencies. Over time these cells will cool and recover but it’s still scary stuff, especially for those who use phones or Bluetooth headsets for a prolonged time each day.


P(EMF’s) within the therapeutic ranges (1-100Hz) are not even absorbed by the body and actually just pass right through without any resistance. They do not vibrate cells or heat them up but actually encourage the cells to form healthy new ones and push waste material out of the current cells in our bodies and the reason we tell people to drink water often in order to detox those waste materials after using PEMF’s. The same way our body’s get rid of nasties if you went out for a run or got a deep tissue massage.


The earth’s natural magnetic field resonates at 7.8Hz so, we are surrounded by this frequency in nature, therefore PEMF’s within the therapeutic range are seen as much more natural frequencies than those, some of our household items use and even some other therapeutic devices that rely on heating tissues within the body. PEMF’s are the best way to bring natural frequencies back into our homes and to our bodies to create the optimal environment to heal and regenerate.

Electromagnetic spectrum

Do PEMFs effect brain function? 

Absolutely, PEMFs are used to influence brain function and specifically, the CELLER8 programs are designed around the brain frequencies in the programs. The ‘Morning’ program uses BETA (12-30Hz) frequencies, to give us energy and encourage the brain to work at optimum frequencies for the early part of the day or for focus. The ‘Evening’ program uses ALPHA (8-10Hz) frequencies and allows us to relax and recover at the later part of the day and the ‘Night’ program uses DELTA (0-4Hz) frequencies. In ‘Night’ mode we recommend using the CELLER8 without the full body mat and just placing it close to you head, by the pillow or on the bedside table for example to encourage the brain to stay in the DELTA frequencies throughout sleep. As a bonus program the ‘Meditation’ mode runs frequencies within the THETA (4-8Hz) to assist us to really fall into a mediative state of mind. 

Human brainwaves

Is PEMF therapy FDA approved?

PEMF therapy is FDA approved for certain conditions (not all are listed below) and a short timeline of FDA approval is as follows:


1979 – FDA approved PEMF therapy for healing non-union fractures.


1987 – FDA approved for adjunct therapy when treating postoperative edema and pain.


1998 - FDA approved PEMF Therapy for urinary incontinence and muscle stimulation.


2004 - FDA approved PEMF Therapy for cervical fusion patients at high-risk of non-fusion.


2006 - FDA approved PEMF Therapy for treatment of depression and anxiety.


2011 – FDA approved PEMF Therapy for treatment of brain cancer.


2015 - FDA reclassified PEMF devices from their existing Class 3 category to a Class 2 status, and most PEMF devices that are sold today in the United States are FDA registered as wellness devices.

Why can PEMF devices be so expensive? 

The simple answer is usually that a decent PEMF device has a high cost of raw materials. A lot of this cost can be associated with the intensity a device can reach and the copper used inside a system to create this intensity. The CELLER8 mat uses way more copper in each mat than a lot of competitors mats in this price range, including some of the PEMF mats that are super lower intensity and much less copper but more than double the price of a CELLER8. Each copper coil in the CELLER8 mat weighs approx. 200 grams and in total we actually use approx. 2.5 KGs of copper in each mat including all the connecting components of each coil. So, our raw material cost is very high compared to our RRP and compared to a lot of the other PEMF mat suppliers. 

Disclaimer

The CELLER8® PEMF device is used for applying PEMF sessions. It does not claim to treat or cure any medical illnesses and you should always discus any medical concerns with your doctor.